Barchan
A barchan is a medieval mould for casting coin metal, documented in particular at the Kutná Hora mint in the era of Prague groschen. It was made of moistened and reinforced textile, into which a coin alloy was poured to form rods intended for further processing.
The barchan belongs to the less well-known but very practical elements of medieval coin production. In the period when Prague groschen and their fractions were being struck in the Czech lands, it was first necessary to prepare the coin metal in a form suitable for further operations, that is, for the production of flans and the subsequent strike. Before the metal turned into small discs, it had to pass through a foundry stage: melting, alloying and casting into a shape that could be safely handled, measured and further worked.
It was precisely here that the barchan was used as a "soft" casting mould. It was made of textile that was moistened and stiffened so as to hold its shape even with brief contact with the hot metal. Into such prepared moulds the coin alloy was poured (in practice this was silver with a copper admixture), and the result was rods, which in the Kutná Hora environment are referred to as cány. These semi-finished products were an intermediate stage between the melt and the final flan: they could be stored, transported within the works, and above all dosed and divided for further processing.
History
Casting into barchans took place in the mint's foundry. So that the metal could flow smoothly into the textile mould, the "mouth" openings of the mould had to be opened and secured. According to period descriptions, this was done by specialised workers using simple iron implements to maintain the shape and the flow of the melt. Since this was an operation with high temperatures and a risk of spoiling the metal, it was crucial to have procedures that minimised losses of both material and time.
From the 16th century, more durable and more precise metal moulds and other technological procedures were ever more often adopted in coin production, which better met the demands for repeatability and parameter control. The barchans therefore gradually gave way to solutions that allowed more precise definition of the dimensions of the cast and easier organisation of the subsequent division and rolling. Even so, the barchan remains an important testimony to how varied the technological paths to an "ordinary" coin were and how large a role practical workshop innovations played in the Middle Ages.
The casting mould, the material and the subsequent production steps
The barchan was a mould based on textile material: it was a moistened and stiffened cloth which, after shaping, formed a channel for the casting of the metal. An important property was short-term resistance to temperature and the ability to hold shape during the pouring. The mould had an inlet opening ("mouth") for pouring in the melt and a body of the mould, which determined the cross-section and length of the cast rod. So that no deformation occurred during pouring, simple mechanical reinforcements and opening aids were used.
The cast product was rods (cány) of coin alloy, most often silver with a copper admixture, because alloying made it possible to achieve the required hardness and working quality of the material. The rods were then processed: according to technological practice the metal was divided, remelted, possibly rolled or hammered into strips, and from these the flans were prepared. The parameters of the barchan thus directly influenced the initial geometry of the semi-finished product and thereby also the subsequent steps, mainly the speed of work, losses during division and the demands on further heating and processing. In a description of the barchan, therefore, the principle of the mould (textile vs. metal), the type of semi-finished product cast and the link to flan preparation in a particular mint workshop are tracked above all.