Chasing (cizelovani)
Chasing is a fine manual working of metal in which, by means of strikes with small tools, details of relief and surface are emphasised or finished. It is used mainly as finishing work on castings, embossed pieces and medals, both cold and hot.
Chasing ranks among the oldest techniques of artistic metalworking. It springs from the simple need to "bring" a metal object to its final form: after casting, forging or embossing, traces of the mould, unevennesses, transitions between surfaces and small defects often remain on the surface. Precisely the manual finishing enabled craftsmen to achieve sharper edges, cleaner lines and more pronounced relief — that which distinguishes an ordinary product from a master's work.
In the European context chasing gradually became established as a specialised skill of goldsmiths, silversmiths and metal polishers. Alongside "hard" hammer-shaping, more delicate modelling of the surface also developed, often in combination with embossing and raising of relief from the reverse (in French repoussé). A skilled chaser was able to work with metal in such a way that the relief appeared lively — for example, so that light naturally broke on the curves, and the ornament or lettering was legible even in small format.
In the Middle Ages and the early modern period chasing had a firm place above all in liturgical and representational art. Decorated reliquaries, monstrances, chalices or belt ornaments demanded a precision that could not be achieved by casting alone. In the Renaissance the emphasis on observing nature and anatomy strengthened at the same time, which was projected also into the detail of metalwork. Among craftsmen who described goldsmithing and metalworking techniques also in writing, Benvenuto Cellini is commonly cited; similar treatises and workshop practice helped to transmit experience across Europe.
History
With the development of court culture of the 17th and 18th centuries the significance of medallic art and representational strikes grew. Although striking itself enables the motif to be repeated, manual work did not disappear: chasing found use in finishing models, adjusting cast templates, retouching details and working on metal decorations meant to look "livelier" than a purely machine impression. In a broader sense it was a craft response to the audience's expectations — so that the portrait looked credible, the lettering was sharp and the ornaments had depth.
In the 19th century metalworking became significantly mechanised and part of the decoration was taken over by presses and dies. Precisely then chasing became defined as an activity that supplements and refines machine production — either in the luxury segment or where individual quality is required. Modern times have then brought new roles as well: alongside the creation of artistic objects, chasing is used in restoration and conservation practice, because it can work sensitively with the surface, edges and structure of the metal.
The basis of chasing is a system of strikes guided through shaped tools (smoothing, grooving, granulating or matting). The object during the work must be supported in such a way that the energy of the strike does not return into the material uncontrolled; for this chaser's pitch is traditionally used, or other supports and clamping aids. According to the hardness of the metal, work is done cold, or the material is continuously annealed so that it regains malleability and does not crack in stressed places.
Technique, tools and use
In practice chasing has two main forms. The first is "retouching" — the finishing of a casting or forged piece, the removal of traces of mould partition, the unifying of transitions and the emphasising of edges. The second is artistic work, where the chaser directly creates structures, ornaments and fine modellings that mere casting or pressing could not capture. The result can be a smooth, mirror-like surface, but also a deliberate texture which improves the legibility of the relief and gives the metal character.
In numismatics and medallic art chasing appears mainly with artistic medals and relief objects, where details of the model or casting are finished manually before the final transfer into dies, or where small details on finished pieces are gently corrected. At the same time it holds that additional "chasing-over" can change the original surface of a historical coin or medal — therefore for collector pieces it is important to perceive the natural patina, the regularity of detail and possible traces of tools. As a curiosity, the expression chasing (cizelování) is also used in Czech in viticulture for specific work with grapes; in the numismatic context, however, it means exclusively work with metal.