Blanching of coins
The blanching of coins is a surface treatment of silver coins in which copper is chemically removed from a thin layer on the surface of the alloy, and the coin acquires a lighter, "whiter" appearance. It was used chiefly with small strikings with a higher proportion of copper, so that they would seem of better quality and more uniform.
The blanching of coins is among the techniques that arose from a very practical need of medieval and early modern mints: to maintain trust in the circulating currency even when it was struck from an alloy of silver and copper. Small denominations had to be durable and easy to strike, and so copper was often added to silver. Such coins, however, could at first sight have a darker, yellowish or "copper" tinge, which raised suspicions that they were of a worse metal or even of false manufacture. The mint therefore sought a procedure by which to unify the coin visually and bring it closer to the appearance of "purer" silver without having to change the whole coinage standard.
The principle of blanching rests on the fact that the surface of an alloy can be chemically treated so that copper is removed from the thinnest layer and relatively more silver remains on the surface. In practice, in the mints, blanks (flans) were prepared in large quantities and, after their forging or cutting, were treated in a separate workshop even before striking. The minting operation was therefore not only about dies and the hammer: part of the "production of the coin" was also steps that ensured that the result would have the desired colour, lustre and an appearance acceptable for the market.
In Czech and Central European conditions this method was applied especially where small silver coins with a higher copper content were struck. It was precisely with the small values, which passed through people's hands most often, that appearance was important; people judged them quickly and by the surface. Blanching helped the coin to look "silvery" even if its alloy was, in terms of fineness, more modest. At the same time it was a way of achieving a more uniform appearance of the entire issue: coins from different melts and bars could differ in shade, but the surface treatment partly evened out the differences.
History
The technique gradually improved as the chemical experience of the craftsmen in the mints developed. This was not laboratory chemistry in the modern sense but tested recipes and procedures that were passed on within the mint workshop. The result was to be functional and repeatable: to remove surface impurities after the working of the metal, refine the appearance and give the coin the colour that the public expected of silver legal tender. Blanching therefore became a standard "invisible" step in the production of part of small strikings, even though the actual metal inside the coin remained the same alloy as before treatment.
The blanching of coins was most often performed on flans (or on freshly struck coins) in a special part of the mint, where the metal was treated with heat and a solution with chemically active components. The aim was to dissolve or release copper from the very topmost layer of the alloy and at the same time to remove impurities caused by the preceding working of the metal. The proportion of silver on the surface was thereby relatively increased and the coin acquired a lighter, sometimes strikingly white tone. In period practice such a coin "posed" as more pure, even though it was above all a visual and surface effect.
This treatment was useful chiefly for coins where, for the sake of solidity and the technology of striking, more copper was used. Without blanching the surface could quickly darken, look mottled or "coppery", and thereby provoke distrust. On the other hand, it is important that blanching in itself did not change the weight standard nor the actual content of silver in the core of the coin; it was a surface layer. In circulation the blanched appearance wore off over time: by friction and use the thin treated layer could be partly rubbed away and the original tone of the alloy showed through. Therefore on some older strikes you will encounter a coin which has lighter surfaces in protected places of the relief and darker or "coppery" parts on the raised areas.
Procedure, purpose and manifestations on the coin
For numismatics, blanching is valuable as information about the technology and economy of mintage. It shows that the appearance of a coin was an important instrument of trust both for the mint and for the ruler: a small silver coin was to appear honest, intelligible and uniform. In practice, then, blanching represents a compromise between technological possibilities, the price of silver and the market's demand for a "silver" coin. At the same time, it helps to explain certain typical surface phenomena on historical strikes, which to a layman may seem like a defect but in reality are connected with the period production method.