Nordic gold
Nordic gold is an alloy of copper, aluminium, zinc and tin used for the striking of euro coins in the values of 10, 20 and 50 cents, which, despite its name, contains no gold. In numismatics Nordic gold represents a modern coinage alloy developed in Sweden, while its golden colour, resistance to corrosion and hypoallergenic properties without any nickel c…
Nordic gold was developed by the Swedish company Outokumpu in 1991 as a replacement for traditional alloys containing nickel, which caused allergic reactions in sensitive persons. The original name of the alloy was 'Nordic Gold', a registered trademark, which quickly became the generic designation for this type of alloy. The composition of 89 per cent copper, 5 per cent aluminium, 5 per cent zinc and 1 per cent tin was the result of long research aimed at achieving an optimal combination of properties — a golden colour, hardness, resistance to wear and the absence of allergenic metals.
The first practical use of Nordic gold came in 1992, when Sweden struck ten-krona coins from this alloy. The success of the Swedish experiment led to its rapid spread — Finland followed with markka coins, and other Nordic countries began to test the alloy for their national currencies. Nordic gold gained international recognition when it was selected for the middle-value euro cent coins. The European Central Bank appreciated above all its hypoallergenic properties and the fact that the alloy does not meet the requirements for electronic vending machines set for genuine gold coins, which reduces the risk of fraud.
History
The introduction of the euro in 2002 meant the mass spread of Nordic gold — billions of coins of the value of 10, 20 and 50 euro cents began to circulate across Europe. The alloy proved excellent properties in everyday use — the coins retain their golden appearance even after years of intensive circulation, are resistant to corrosion caused by sweat and moisture, and their hardness ensures a long working life. The magnetic properties of Nordic gold permit easy detection in vending machines and sorting devices.
The contemporary use of Nordic gold extends beyond European borders — the alloy has been adopted by dozens of countries for their circulating and commemorative coins. The Polish 2 złoty, the Czech twenty-koruna pieces before the introduction of steel, the Argentine peso and many other coins use this alloy. Producers value the relatively low price compared with traditional nickel-containing alloys and the simplicity of processing. Nordic gold is also used for medals, tokens and decorative objects, where a golden appearance without the high cost of real gold is desired.
Technical properties and composition
Nordic gold has a precise composition laid down by a European standard — 89 per cent copper provides the basic structure and colour, 5 per cent aluminium increases hardness and resistance to corrosion, 5 per cent zinc improves castability, and 1 per cent tin stabilises the alloy. The density of Nordic gold is 7.01 g/cm³, which is significantly less than pure gold at 19.3 g/cm³. The melting point lies around 960 degrees Celsius.
The alloy has a characteristic golden colour with a slightly greenish tinge, which differs from the warm yellow colour of real gold. Vickers hardness reaches 125–145 HV, which is more than pure gold or silver but less than steel. Electrical conductivity is approximately 13 per cent of the conductivity of copper; magnetic properties are weakly diamagnetic. Nordic gold is fully recyclable and environmentally friendly.